What is access turnstile?
An access turnstile is a type of security barrier that is often used to control access to buildings or other secured areas. Access turnstile typically consists of a rotating barrier that is mounted on a pedestal or other support. When someone wants to enter the secured area, they insert a card, fingerprint, QR code or other type of token into a reader that is connected to the access turnstile. The access turnstile then rotates to allow the person to pass through.What types of materials are used to make access turnstiles?
Model No. | MS02Q2 |
Cabinet Material | SUS304/316 stainless steel |
Arm Material | SUS304/316 stainless steel |
Unit Dimension(W*L*H) | 2200*1450*2250mm |
Passing Direction | Uni-directional/Bi-directional |
Photoelectric Sensor | None |
Passage Width | 600mm |
Opening/Closing | 0.6 seconds |
Flow Rate | 30-35 person/min |
Mechanism |
Absorption of electromagnet/Motor |
Power Supply | AC100-230V,50Hz |
Voltage | from the AC (100–240) V, 50/60 Hz from a DC source 24 V |
Application | Indoor and outdoor |
Working Temperature | -25℃~+70℃ |
Operation Humidity | 0 ~ 95% (No freeze) |
MCBF | 8,000,000 cycles |
Anti-panic mode | Automatically open when power off |
Communication | Dry contact, Relay signal, RS485 |
● System operates smoothly, quietly, and without mechanical impact;
● Passage is limited to one at a time, preventing tailgating;
● Automatic reset function: the spinning arm will lock if nobody enters within 5 seconds (can be specified);
● Provides the utmost security from floor to ceiling;
● Automatic unlocking upon power failure or fire alarm;
● May be combined with any form of access control system;